Difference between revisions of "DVB-S Demodulator GUI"
| Line 1: | Line 1: | ||
The DVB-S Demod-GUI program is written by Marcell Kroner to receive and decode DVB-S and DVB-S2 signals. Hardware supported includes LimeSDR, Pluto and the £10 RTL SDR dongle. | The DVB-S Demod-GUI program is written by Marcell Kroner to receive and decode DVB-S and DVB-S2 signals. Hardware supported includes LimeSDR, Pluto and the £10 RTL SDR dongle. | ||
| − | [[File: | + | [[File:m0mux_3.png|center|400px]] |
==Demod-GUI specifications== | ==Demod-GUI specifications== | ||
Revision as of 13:04, 2 May 2019
The DVB-S Demod-GUI program is written by Marcell Kroner to receive and decode DVB-S and DVB-S2 signals. Hardware supported includes LimeSDR, Pluto and the £10 RTL SDR dongle.
Demod-GUI specifications
The program will receive and demodulate DVB-S and DVB-S2 signals with a maximum symbol rate of and minimum rate of....
PC requirements
Due to the processing required to receive and demodulate DVB-S and S2 a reasonable spec PC is reguired. The follow is the minimum specification recommended:
- processor =
- Memory =
- SSD drive
=OS requirements
The program will run under Windows 10.....
SDR hardware supported
The program supports the following hardware:
- LimeSDR
- Pluto
- RTL Dongle
Installation
The program can be downloaded from....
Install the program by running the exe?
Plug in the SDR hardware before running the program.
Running Demod-GUI for the first time
When first running the program, the following screen will be shown....
Ensure you...