Difference between revisions of "2-Way RF Switch"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
The 2-way RF switch is a new addition to the Portsdown system. It decodes a signal sent on the symbol rate switching lines (all 3 high, which was previously unused) which is used to indicate that the LimeSDR output should be used, rather than the Filter-modulator board. | The 2-way RF switch is a new addition to the Portsdown system. It decodes a signal sent on the symbol rate switching lines (all 3 high, which was previously unused) which is used to indicate that the LimeSDR output should be used, rather than the Filter-modulator board. | ||
| + | |||
| + | [[File:2 Way Switch.jpg|400px]] | ||
The block diagram shows a comprehensive arrangement with all the features. Many of the blocks are optional – it depends on your requirements. | The block diagram shows a comprehensive arrangement with all the features. Many of the blocks are optional – it depends on your requirements. | ||
| − | [[File:Output Switching.JPG|400px]] | + | [[File:Output Switching.JPG|600px]] |
| + | |||
| + | |||
| + | [[File:2 Way switch Circuit.jpg|400px]] | ||
Revision as of 09:02, 17 April 2019
The 2-way RF switch is a new addition to the Portsdown system. It decodes a signal sent on the symbol rate switching lines (all 3 high, which was previously unused) which is used to indicate that the LimeSDR output should be used, rather than the Filter-modulator board.
The block diagram shows a comprehensive arrangement with all the features. Many of the blocks are optional – it depends on your requirements.
