Ryde Hardware: Difference between revisions

From BATC Wiki
Jump to navigation Jump to search
Created page with "The Ryde Receiver is based around a Raspberry Pi 4 (exact model to be decided). The prototype hardware is shown here 765px"
 
No edit summary
Line 1: Line 1:
The Ryde Receiver is based around a Raspberry Pi 4 (exact model to be decided).
The Ryde Receiver is based around a Raspberry Pi 4 (exact model to be decided).


The prototype hardware is shown here
The hardware currently required is as follows - note this may change and you buy at your on risk!
 
* Rapberry Pi4 and heatsink / fan
* Sandisk Ultra 8GB+ SD card
* Micro to standard HDMI converter
* IR receiver and remote control
* MiniTiouner V2 hardware - note current beta models connect via USB
 
Most of the early development protypes are being hosted on old STB cases - these provide a case, possibly a PSU and IR detector diode and front panel switches.
 
An example prototype hardware is shown here:


[[File:Inside Case Small.jpg|765px]]
[[File:Inside Case Small.jpg|765px]]

Revision as of 12:19, 14 July 2020

The Ryde Receiver is based around a Raspberry Pi 4 (exact model to be decided).

The hardware currently required is as follows - note this may change and you buy at your on risk!

  • Rapberry Pi4 and heatsink / fan
  • Sandisk Ultra 8GB+ SD card
  • Micro to standard HDMI converter
  • IR receiver and remote control
  • MiniTiouner V2 hardware - note current beta models connect via USB

Most of the early development protypes are being hosted on old STB cases - these provide a case, possibly a PSU and IR detector diode and front panel switches.

An example prototype hardware is shown here: