Ryde GPIO breakout

From BATC Wiki
Revision as of 09:51, 31 July 2020 by G8GTZ (talk | contribs)
Jump to navigation Jump to search

To help constructors connect easily to the Ryde RPIO, BATC has produced a small daughter board - PCBs will be availble in the BATC shop.

Ryde GPIO5.png

Power requirements

Note the GPIO board requires 5v NOT 12v!

Bill of materials

A full bill of materials will follow but the schematic is shown below.

Ryde GPIO2.jpg

Ryde GPIO 1.jpg

Retrieved from ‘https://wiki.batc.org.uk/index.php?title=Ryde_GPIO_breakout&oldid=7347’