Ryde GPIO breakout

From BATC Wiki

Revision as of 09:54, 31 July 2020 by G8GTZ (talk | contribs) (→‎Bill of materials)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

To help constructors connect easily to the Ryde RPIO, BATC has produced a small daughter board - PCBs will be availble in the BATC shop.

Construction notes

Note the GPIO board requires 5v NOT 12v!

Bill of materials

A full bill of materials will follow but the schematic is shown below.

Retrieved from ‘https://wiki.batc.org.uk/index.php?title=Ryde_GPIO_breakout&oldid=7351’

Navigation menu