Difference between revisions of "DATV repeater audio switch"
Jump to navigation
Jump to search
(Created page with "The 8 channel input audio switch was designed to meet the needs of the GB3SQ TV repeater. It is controlled by i2c and is supported in the BATC repeater controller. File:8c...") |
|||
| (19 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | Back to [[Repeater Controller|repeater controller]] main page | ||
The 8 channel input audio switch was designed to meet the needs of the GB3SQ TV repeater. | The 8 channel input audio switch was designed to meet the needs of the GB3SQ TV repeater. | ||
| − | It is controlled by i2c and is supported | + | It is controlled by i2c and is supported by the BATC repeater controller [[DATV Repeater i2c Interface]] |
| + | |||
| + | i2c commands are listed in the MCP23089datasheet [https://ww1.microchip.com/downloads/en/DeviceDoc/21919e.pdf here.] | ||
| + | |||
| + | It can be configured as an 8 channel mixer with two outputs or as two 4 channel mixers with one output each. The 8 switch elements are addressed via I2C. | ||
[[File:8ch audio switch.jpg|400px]] | [[File:8ch audio switch.jpg|400px]] | ||
| + | |||
| + | ==Schematics and BOM== | ||
| + | |||
| + | [[File:REPEATER I2C Audio Switch V2022 rrb.png|400px]] | ||
| + | |||
| + | |||
| + | Schematic: [[media:REPEATER I2C Audio Switch V2022 SCH.pdf]] | ||
| + | |||
| + | |||
| + | Parts list: [[:File:REPEATER I2C AUDIO SWITCH PARTS V2022.xlsx]] | ||
| + | |||
| + | ===Gerber files=== | ||
| + | |||
| + | A zip file containing the Gerber files enabling PCBs to be made is available here [[:File:REPEATER I2C AUDIO SWITCH V2022.zip]] | ||
| + | |||
| + | ===Notes=== | ||
| + | |||
| + | * There are alternative parts for the pots. They have different rotations. Before submitting the parts list choose the pot and between Molex and screw terminals. | ||
| + | |||
| + | * CT6ER103-ND is inserted with the wiper in the square pad, the others go 180° opposite | ||
| + | |||
| + | * This PCB uses tantalum capacitors - the bar on the case indicates +ve and not - ve as it does on some electrolytic capacitors. | ||
| + | |||
| + | [[File:tant.png|400px]] | ||
Latest revision as of 16:51, 24 February 2022
Back to repeater controller main page
The 8 channel input audio switch was designed to meet the needs of the GB3SQ TV repeater.
It is controlled by i2c and is supported by the BATC repeater controller DATV Repeater i2c Interface
i2c commands are listed in the MCP23089datasheet here.
It can be configured as an 8 channel mixer with two outputs or as two 4 channel mixers with one output each. The 8 switch elements are addressed via I2C.
Schematics and BOM
Schematic: media:REPEATER I2C Audio Switch V2022 SCH.pdf
Parts list: File:REPEATER I2C AUDIO SWITCH PARTS V2022.xlsx
Gerber files
A zip file containing the Gerber files enabling PCBs to be made is available here File:REPEATER I2C AUDIO SWITCH V2022.zip
Notes
- There are alternative parts for the pots. They have different rotations. Before submitting the parts list choose the pot and between Molex and screw terminals.
- CT6ER103-ND is inserted with the wiper in the square pad, the others go 180° opposite
- This PCB uses tantalum capacitors - the bar on the case indicates +ve and not - ve as it does on some electrolytic capacitors.
