DATV repeater audio switch: Difference between revisions

From BATC Wiki
Jump to navigation Jump to search
Line 20: Line 20:
===Notes===
===Notes===


There are alternative parts for the pots. They have different rotations. Before submitting the parts list choose the pot and between Molex and screw terminals.
* There are alternative parts for the pots. They have different rotations. Before submitting the parts list choose the pot and between Molex and screw terminals.


CT6ER103-ND is inserted with the wiper in the square pad, the others go 180° opposite
* CT6ER103-ND is inserted with the wiper in the square pad, the others go 180° opposite


This PCB uses tantalum capacitors - the bar on the case indicates +ve and not - ve as it does on some electrolytic capacitors.
* This PCB uses tantalum capacitors - the bar on the case indicates +ve and not - ve as it does on some electrolytic capacitors.


[[File:tant.png|400px]]
[[File:tant.png|400px]]

Revision as of 10:31, 19 February 2022

Back to repeater controller main page

The 8 channel input audio switch was designed to meet the needs of the GB3SQ TV repeater.

It is controlled by i2c and is supported by the BATC repeater controller - i2c commands are listed in the MCP23089datasheet here.

It can be configured as an 8 channel mixer with two outputs or as two 4 channel mixers with one output each. The 8 switch elements are addressed via I2C.

Schematics and BOM


Schematic: media:REPEATER I2C Audio Switch V2022 SCH.pdf


Parts list: File:REPEATER I2C AUDIO SWITCH PARTS V2022.xlsx

Notes

  • There are alternative parts for the pots. They have different rotations. Before submitting the parts list choose the pot and between Molex and screw terminals.
  • CT6ER103-ND is inserted with the wiper in the square pad, the others go 180° opposite
  • This PCB uses tantalum capacitors - the bar on the case indicates +ve and not - ve as it does on some electrolytic capacitors.