Difference between revisions of "Gerber Files"
| Line 29: | Line 29: | ||
[[:File:RydeGpioV2.zip]] | [[:File:RydeGpioV2.zip]] | ||
| − | [[File:RYDE GPIO 3D.jpg| | + | [[File:RYDE GPIO 3D.jpg|500px]] |
| − | [[File:RydeV2Schematic.jpg| | + | [[File:RydeV2Schematic.jpg|500px]] |
[[:File:ibom.zip]] | [[:File:ibom.zip]] | ||
Revision as of 16:03, 13 July 2022
This is a centralised index of Gerber Files which have been used for BATC and BATC Members' projects.
No responsibility is accepted for any errors, but they are listed here to promote home construction and experimentation.
Files should be uploaded as .zip files, and should also be referenced from another Wiki page describing the project.
Ryde Front Panel
The Ryde Front Panel Push Button PCB as descried here: Ryde_Hardware#Ryde_front_panel
ADF4351 PIC Controller
The ADF4351 PIC Controller described here: ADF435x_PIC
DATV Repeater Audio Switch
The DATV Repeater Audio Switch as described here DATV_repeater_audio_switch
File:REPEATER I2C AUDIO SWITCH V2022.zip
G0MJW's Ryde board
This is like a plug in board for the PI4 that provides the 5V PSU, a cooling option and Ryde IO interface. The information is all below. There are two PSU options, only one is required. All fairly simple. These Gerbers are set up for JLC PCB. In theory all you need to do is upload the zip file with the gerbers and select quantity, solder mask colour and postage options. The BOM is an HTML file in the ibom zip.
G0MJW's PD4 board
TBC (after CAT22)
This is a PCB to implement a Portsdown 4 with 25 pid connector for interfacing to test equipment.
