Difference between revisions of "DATV equipment capability"
Jump to navigation
Jump to search
| (17 intermediate revisions by 2 users not shown) | |||
| Line 9: | Line 9: | ||
===Portsdown 4=== | ===Portsdown 4=== | ||
| − | Portsdown system hosted on Raspberry Pi4 | + | Portsdown system hosted on Raspberry Pi4. For more details go to https://wiki.batc.org.uk/Portsdown_4 |
| − | + | ==== When used with a Lime Mini SDR==== | |
| − | |||
| − | ====Lime Mini SDR==== | ||
* Frequency coverage 30 and 3500 MHz. | * Frequency coverage 30 and 3500 MHz. | ||
| Line 25: | Line 23: | ||
Note - Watch for high power calibration spike at start of transmissions. More info at https://wiki.batc.org.uk/Using_LimeSDR_with_Portsdown | Note - Watch for high power calibration spike at start of transmissions. More info at https://wiki.batc.org.uk/Using_LimeSDR_with_Portsdown | ||
| − | ====Pluto SDR==== | + | ====When used with a Pluto SDR==== |
| − | * Frequency coverage | + | * Frequency coverage 50?? MHz > 4100 MHz (for DATV – will work up to 6 GHz with Langstone narrowband SDR and Portsdown SigGen). |
* DVB-S and DVB-S2 plus DVB-T | * DVB-S and DVB-S2 plus DVB-T | ||
| Line 41: | Line 39: | ||
* For DVB-S and DVB-S2, specific firmware is required (F5OEO’s FIRM2101RC of 5 February 2020: https://wiki.batc.org.uk/Portsdown_4_Pluto#Suitable_Pluto_Firmware ). This also works for DVB-T. | * For DVB-S and DVB-S2, specific firmware is required (F5OEO’s FIRM2101RC of 5 February 2020: https://wiki.batc.org.uk/Portsdown_4_Pluto#Suitable_Pluto_Firmware ). This also works for DVB-T. | ||
| − | ====DATVexpress hardware==== | + | ====When used with DATVexpress hardware==== |
* DVB - S only, frequency coverage 70 MHz to 2450 MHz. More info here https://www.datv-express.com/ | * DVB - S only, frequency coverage 70 MHz to 2450 MHz. More info here https://www.datv-express.com/ | ||
| Line 53: | Line 51: | ||
https://wiki.batc.org.uk/Portsdown_2020 | https://wiki.batc.org.uk/Portsdown_2020 | ||
| − | ====Lime Mini SDR==== | + | ==== When used with Lime Mini SDR==== |
* Frequency coverage 30 > 3500 MHz. | * Frequency coverage 30 > 3500 MHz. | ||
| Line 65: | Line 63: | ||
Note - Watch for high power calibration spike at start of transmissions. More info at https://wiki.batc.org.uk/Using_LimeSDR_with_Portsdown | Note - Watch for high power calibration spike at start of transmissions. More info at https://wiki.batc.org.uk/Using_LimeSDR_with_Portsdown | ||
| − | ====DATVexpress hardware==== | + | ====When used with DATVexpress hardware==== |
* DVB - S only, frequency coverage 70 MHz to 2450 MHz. More info here https://www.datv-express.com/ | * DVB - S only, frequency coverage 70 MHz to 2450 MHz. More info here https://www.datv-express.com/ | ||
| Line 93: | Line 91: | ||
===DATVExpress FPGA based hardware=== | ===DATVExpress FPGA based hardware=== | ||
| − | + | Frequency coverage 70 MHz to 2450 MHz. More info here https://www.datv-express.com/ | |
===DATVExpress Windows DATV transmit sofware=== | ===DATVExpress Windows DATV transmit sofware=== | ||
| Line 103: | Line 101: | ||
=DATV receive hardware= | =DATV receive hardware= | ||
| − | ==MiniTiouner DVB-S== | + | ==MiniTiouner DVB-S / S2 USB receiver hardware== |
There are several MiniTiouner PCBs available all based on a design by F6DZP and with similar specifications: | There are several MiniTiouner PCBs available all based on a design by F6DZP and with similar specifications: | ||
| − | + | * Frequency coverage 143 MHz >2450 MHz. | |
| − | ====BATC | + | * DVB-S and DVB-S2 (MPEG-2, H264 and H265) - receives signals down to 35Ks when used with F6DZP MiniTiouner PC software - |
| + | |||
| + | ====BATC MiniTiouner version 2==== | ||
https://wiki.batc.org.uk/MiniTioune | https://wiki.batc.org.uk/MiniTioune | ||
| Line 116: | Line 116: | ||
====REF MiniTiouner==== | ====REF MiniTiouner==== | ||
| + | ==Knucker DVB-T USB receiver hardware== | ||
| + | |||
| + | * Frequency coverage 44 > 1002 MHz | ||
| − | + | * DVB-T (not DVB-T2) down to bandwidth of 125 KHz | |
| − | |||
| − | |||
https://wiki.batc.org.uk/Knucker | https://wiki.batc.org.uk/Knucker | ||
| Line 143: | Line 144: | ||
===Ryde set top box and repeater receiver=== | ===Ryde set top box and repeater receiver=== | ||
| − | * DVB-S and DVB-S2 (MPEG-2, H264 and H265) | + | https://wiki.batc.org.uk/Ryde_Receiver |
| − | https://wiki.batc.org.uk/ | + | |
| + | * Single channel DVB-S and DVB-S2 (MPEG-2, H264 and H265) receiver with a set-top box user interface designed as an easy to use shack monitoring receiver. Goes down to 125ks when Minituner Mk2 with SERIT NIM plugged into USB port - tunes between 143 MHz to 2450 MHz. | ||
| + | |||
| + | * DVB-T (not T2) development release via SSH console menu. Bandwidths: 150 – 500 kHz, 1, 1.7, 2, 4, 5, 6, 7 and 8 MHz | ||
| + | |||
| + | ===WinterHill multichannel receiver=== | ||
| + | |||
| + | https://wiki.batc.org.uk/Winter_Hill_receiver_project | ||
| + | |||
| + | * Designed primarily for use on QO100, WinterHill is a more advanced multi-channel receiver based on BATC advanced receiver hardware https://wiki.batc.org.uk/Advanced_receiver_hardware | ||
| + | |||
| + | * Runs on Rpi4 desktop and capable of decoding up to 4 DVB-S2 signals at once. | ||
Latest revision as of 12:52, 17 March 2021
This page attempts to document the capabilities of common DATV transmit and receive equipment. It will be continually updated as improvements are made to equipment and software.
Transmit systems
Portsdown DATV system
The following describes the system capability but will require the correct level of Portsdown software and SDR firmware.
Portsdown 4
Portsdown system hosted on Raspberry Pi4. For more details go to https://wiki.batc.org.uk/Portsdown_4
When used with a Lime Mini SDR
- Frequency coverage 30 and 3500 MHz.
- Output level with standard Lime 1.30 Firmware: 71 – 1300 MHz adjustable around +10 dBm. 2400 MHz +4 dBm, 3400 MHz -11 dBm.
- Output level with 1.30 and the LimeDVB overlay is -6dB but allows higher SRs and also has a much cleaner output spectrum.
- DVB-S and DVB-S2 (MPEG-2 and H264) only.
Note - Watch for high power calibration spike at start of transmissions. More info at https://wiki.batc.org.uk/Using_LimeSDR_with_Portsdown
When used with a Pluto SDR
- Frequency coverage 50?? MHz > 4100 MHz (for DATV – will work up to 6 GHz with Langstone narrowband SDR and Portsdown SigGen).
- DVB-S and DVB-S2 plus DVB-T
- Expected Output levels for DVB-S2 = 71 MHz -3 dBm. 146 MHz 0 dBm. 437 MHz +3 dBm. 1255 MHz +2 dBm. 2400 MHz 0 dBm. 3400 MHz -1 dBm.
Notes:
- Requires range extension and dual core hack before use. https://wiki.analog.com/university/tools/pluto/users/customizing also https://www.ph4x.com/pluto-sdr-hack-2nd-cpu-core/
- Analog Devices firmware version V31 or V32 are OK for narrowband and DVB-T: https://github.com/analogdevicesinc/plutosdr-fw/releases/tag/v0.32
- For DVB-S and DVB-S2, specific firmware is required (F5OEO’s FIRM2101RC of 5 February 2020: https://wiki.batc.org.uk/Portsdown_4_Pluto#Suitable_Pluto_Firmware ). This also works for DVB-T.
When used with DATVexpress hardware
- DVB - S only, frequency coverage 70 MHz to 2450 MHz. More info here https://www.datv-express.com/
- Output level approx +10 dBm over full frequency range.
Portsdown 2020
Portsdown 2020 system hosted on Raspberry Pi3 and running on the Buster OS.
https://wiki.batc.org.uk/Portsdown_2020
When used with Lime Mini SDR
- Frequency coverage 30 > 3500 MHz.
- Output level with standard Lime 1.30 Firmware: 71 – 1300 MHz adjustable around +10 dBm. 2400 MHz +4 dBm, 3400 MHz -11 dBm.
- Output level with 1.30 and the LimeDVB overlay is -6dB but allows higher SRs and also has a much cleaner output spectrum.
- DVB-S, DVB-S2 (MPEG-2 and H264) and DVB-T.
Note - Watch for high power calibration spike at start of transmissions. More info at https://wiki.batc.org.uk/Using_LimeSDR_with_Portsdown
When used with DATVexpress hardware
- DVB - S only, frequency coverage 70 MHz to 2450 MHz. More info here https://www.datv-express.com/
- Output level approx +10 dBm over full frequency range.
F5OEO Pluto firmware
The F5OEO DATV firmware enables the Pluto to become a standalone DATV transmit system.
- Frequency coverage 70 MHz > 4100 MHz
- DVB-S and DVB-S2 plus DVB-T
- Expected Output levels for DVB-S2 = 71 MHz -3 dBm. 146 MHz 0 dBm. 437 MHz +3 dBm. 1255 MHz +2 dBm. 2400 MHz 0 dBm. 3400 MHz -1 dBm.
Firmware notes:
- Requires range extension and dual core hack before use. https://wiki.analog.com/university/tools/pluto/users/customizing also https://www.ph4x.com/pluto-sdr-hack-2nd-cpu-core/
- For DVB-S and DVB-S2, specific firmware is required (F5OEO’s FIRM2101RC of 5 February 2020: https://wiki.batc.org.uk/Portsdown_4_Pluto#Suitable_Pluto_Firmware ). This
DATVExpress project
For more details on the DATVExpress project: https://www.datv-express.com/
DATVExpress FPGA based hardware
Frequency coverage 70 MHz to 2450 MHz. More info here https://www.datv-express.com/
DATVExpress Windows DATV transmit sofware
- Works with DATVExpress hardware, Lime SDRmini and Pluto
- Generates DVB-S, DVB-S2 and DVB-T
DATV receive hardware
MiniTiouner DVB-S / S2 USB receiver hardware
There are several MiniTiouner PCBs available all based on a design by F6DZP and with similar specifications:
- Frequency coverage 143 MHz >2450 MHz.
- DVB-S and DVB-S2 (MPEG-2, H264 and H265) - receives signals down to 35Ks when used with F6DZP MiniTiouner PC software -
BATC MiniTiouner version 2
https://wiki.batc.org.uk/MiniTioune
DATVExpress MiniTiounerExpress
REF MiniTiouner
Knucker DVB-T USB receiver hardware
- Frequency coverage 44 > 1002 MHz
- DVB-T (not DVB-T2) down to bandwidth of 125 KHz
https://wiki.batc.org.uk/Knucker
DATV receive systems
Portsdown 4 Receive capability
- DVB-S and DVB-S2 (MPEG-2, H264 and H265) signals down to 125ks when Minituner Mk2 hardware with SERIT NIM plugged into USB port - tunes between 143 MHz to 2450 MHz.
https://wiki.batc.org.uk/MiniTioune
- DVB-T (not DVB-T2) down to bandwidth of 125 KHz when Knucker PCB with SERIT 4762NIM plugged into USB port - tunes between 44 and 1002 MHz.
https://wiki.batc.org.uk/Knucker
Portsdown 2020 recieve capability
- DVB-S and DVB-S2 (MPEG-2, H264 and H265) signals down to 125ks when Minituner Mk2 with SERIT NIM plugged into USB port - tunes between 143 MHz to 2450 MHz.
https://wiki.batc.org.uk/MiniTioune
- DVB-T (not DVB-T2) down to bandwidth of 125 KHz when Knucker PCB with SERIT 4762NIM plugged in to USB port - tunes between 44 and 1002 MHz.
https://wiki.batc.org.uk/Knucker
Ryde set top box and repeater receiver
https://wiki.batc.org.uk/Ryde_Receiver
- Single channel DVB-S and DVB-S2 (MPEG-2, H264 and H265) receiver with a set-top box user interface designed as an easy to use shack monitoring receiver. Goes down to 125ks when Minituner Mk2 with SERIT NIM plugged into USB port - tunes between 143 MHz to 2450 MHz.
- DVB-T (not T2) development release via SSH console menu. Bandwidths: 150 – 500 kHz, 1, 1.7, 2, 4, 5, 6, 7 and 8 MHz
WinterHill multichannel receiver
https://wiki.batc.org.uk/Winter_Hill_receiver_project
- Designed primarily for use on QO100, WinterHill is a more advanced multi-channel receiver based on BATC advanced receiver hardware https://wiki.batc.org.uk/Advanced_receiver_hardware
- Runs on Rpi4 desktop and capable of decoding up to 4 DVB-S2 signals at once.